Filter
Top Products
GLOBUG 4-SPOT — OPERATION AND PARTS MANUAL — REV. #3 (12/15/08) — PAGE 23
CAUTION - READ SAFETY GUIDELINES
Before performing any maintenance
procedures, be sure to READ the lamp,
balloon, and general safety guidelines in
this manual. Failure to
read
and
understand
these safety guidelines
could cause severe equipment damage
and bodily harm.
7. To unlock outriggers, push downward on the counter-
weight lever indicated by arrow (Figure 25). Grab hold of
outrigger, pull upward, push down and place in stow
position (Figure 26..
Figure 25. Outriggers (Released)
Figure 22. Parking Brake (Release Position)
Figure 26. Outriggers (Stow Position)
8. Press down on the top of the brake pedal (Figure 22)
and hold, then release. This action will dis-engage the
brake mechanism and allow the GloBug to be moved.
Storage
1. Wipe dirt or foreign matter that may have accumulated
on the GloBug 4-Spot during operation. Use a mild
detergent to clean the unit. DO NOT spray the engine
with water.
2. Avoid storing the GloBug 4-Spot in areas that can be
exposed to rain, harsh elements, and high humidity.
3. Place the GloBug 4-Spot in a clean dry location away
from dirt and debris.
GLOBUG 4-SPOT — STORAGE