Filter
Top Products
GLOBUG 4-SPOT — OPERATION AND PARTS MANUAL — REV. #3 (12/15/08) — PAGE 19
GLOBUG 4-SPOT — SETUP
Figure 13. Raising Lamp Stand
SOCKET
CABLE
REFLEX
MIRROR
2. Adjust the reflex mirror and the socket together so that
the cables of the two upper light ing units are positioned
downward sand the cables of the two lower lighting units
are positioned upwards. See Figure 11.
3. Tighten all three latches to secure reflex mirror to the
socket. See Figure 12.
Figure 11. Positioning the Socket
Figure 12. Securing Latch
LATCH
Raising the Lamp Stand
1. Support the lighting units with one hand and pull up the
fold lever with the other hand. The lever wil spring up.
CAUTION - FOLD LEVER PINCH POINT
When operating the fold lever, keep hands and fingers
clear of the pinch points to prevent injury.
2. Push up the lighting unit and push down the fold lever
to lock the lamp stand (Figure 14).
FOLD LEVER
Figure 14. Locking Lamp Stand
FOLD LEVER