PAGE 20 — GLOBUG 4-SPOT — OPERATION AND PARTS MANUAL — REV. #3 (12/15/08)
GLOBUG 4-SPOT — SETUP
Figure 16. Adjusting Direction of Individual Lamp
Figure 17. Adjusting Angle of Light
Adjusting Height of the Lights
1. Turn the handle of the mast winch clockwise to raise
the lighting unit and turn the handle of the mast winch
counterclockwise to lower the lighting unit (Figure 18).
Figure 18. Adjusting Height of Light
Figure 15. Adjusting Direction of Lighting Units
ARM
SOCKET
Turning All Lights In One Direction
1. Loosen the adjust lever. Turn the lighting units in the
desired direction (Figure 15).
ADJUST LEVER
Turning Lights Individually
1. Hold the arm of the lamp and turn it to the desired
direction (Figure 16.
Adjusting Angle of the Lights
1. Hold the socket of the lamp and tilt it to the desired
direction (Figure 17).
WINCH
HANDLE
UP
DOWN
CAUTION - MAST PINCH POINT
When raising or lowering the mast, keep hands and fingers
clear of the various mast sections, this will prevent hands
and fingers from getting pinched.
DANGER - HIGH VOLTAGE POWER LINES
When raising mast, ALWAYS be on
the lookout for overhead obstructions
such as high voltage power lines. The
possibility exists of electrocution,
even death! if the GloBug comes in
contact with
high voltage power lines
.