Filter
Top Products
GLOBUG 4-SPOT — OPERATION AND PARTS MANUAL — REV. #3 (12/15/08) — PAGE 11
GLOBUG 4-SPOT — RULES FOR SAFE OPERATION
Emergencies
■
ALWAYS know the location of the
nearest
fire extinguisher
.
ALWAYS keep electrical cords in good condition. Worn,
bare or frayed wiring can cause electrical
shock, thus causing
Bodily Harm or
even Death
.
NEVER grab or touch a live power
cord with wet hands, the possibility
exists of
Electrical Shock,
Electrocution, and even Death!
POWER
CORD
(POWER ON)
WET
HANDS
DANGER - GloBug Electric Shock Hazards
ALWAYS make sure the
area above GloBug is
open and clear of
overhead power lines
and other obstructions.
The tower extends in
excess of 16.5 ft. (5
meters). Contact with
overhead powerlines or
other obstructions could
result in equipment
damage,
Serious Injury or Death
!
DANGER - GloBug Overhead Obstructions
Maintenance Safety
■
NEVER lubricate components or attempt service on a running
GloBug.
■
ALWAYS allow the GloBug a proper amount of time to cool
before servicing.
■
Keep the GloBug in proper running condition.
■
Fix damage to the GloBug immediately and always replace
broken parts.
■
ALWAYS use the required tool for the job application.
Using damaged or worn tools or using tools inappropriate
for the required application is very dangerous, and may
cause damage to
the machine and
service personnel.
Make sure to use
the appropriate tool
for the specific job.
■
In emergencies
always
know the location of the nearest phone
or
keep a phone on the job site
. Also know the phone
numbers of the nearest
ambulance
,
doctor
and
fire
department
. This information will be invaluable in the case
of an emergency.
■
ALWAYS know the location of the nearest
first aid kit
.
DANGER - GloBug Electric Shock Hazards
NEVER operate the
GloBug or handle any
electrical equipment
while standing in water,
while bare foot, while
hands are wet, or in the
rain. A dangerous
electrical shock
could
occur causing
Severe
Bodily Harm or even
Death.