Filter
Top Products
PAGE 22 — GLOBUG 4-SPOT — OPERATION AND PARTS MANUAL — REV. #3 (12/15/08)
GLOBUG 4-SPOT — STORAGE
Preparation of Lighting Unit For Storage
1. Using the mast winch (Figure 18),
lower the mast fully
.
Turn winch handle counterclockwise to lower mast.
2. Set the lighting units facing the front (Figure 22).
3. Holding the lighting unit with one hand, pull up the fold
lever with the other hand (Figure 23).
Figure 22. Lighting Unit Facing Front
LIGHTING UNIT
FACING FRONT
Figure 23. Fold Lever
FOLD LEVER
4. Push down the lighting unit (Figure 24). Some force is
required when pushing down because of the installed
springs.
5. After lighting unit has been completely pushed down,
push down fold lever (Figure 24) to lock the lamp stand
in place.
Figure 23. Pushing Down Lighting Unit
PUSH DOWN
LIGHTING UNIT
Figure 24. Locking Lamp Stand
PUSH DOWN
LOCK LEVER