PAGE 14 — GLOBUG 4-SPOT — OPERATION AND PARTS MANUAL — REV. #3 (12/15/08)
GLOBUG 4-SPOT — GENERAL INFORMATION
The Multiquip GLOBUG 4-SPOT is a general purpose
floodlight tower intended for emergency and remote lighting
conditions. The GloBug can be powered by a variety of
Multiquip's series generators. Power requirements for running
the GloBug are 120 VAC, 60 Hz @ 18 amps.
The lighting system of Multiquip's GLOBUG 4-SPOT is
comprised of four "Metal Halide" 400 watt lamp with an output
of 136,000 lumens.
The GloBug 4-Spot has the following features:
Stainless steel mast which prevents rust.
Mast stopper prevents sudden drop of mast.
Steering wheel for easy cart movement.
Large-sized pneumatic tires for easy travel even in
rough and uneven roads.
Secure lock-type foot brake.
Tire bumper for protection.
Easy to disassemble and service parts.
Safety winch prevents reverse winding.
ALWAYS make sure the
area above GloBug is
open and clear of
overhead power lines
and other obstructions.
The tower extends in
excess of 14 ft. (4.3
meters). Contact with
overhead powerlines or
other obstructions could
result in equipment
damage,
Serious Injury or Death
!
DANGER - GloBug Overhead Obstructions
NOTE
All information related to the
generator will be referenced in a
separate (supplied) "Operation
and Parts Manual". Operation
and maintenance of the generator
will not
be referenced in this
manual.
Please read carefully the specified
generator manual that will accompany your
GLOBUG 4-SPOT. This manual will explain
how to operate and maintain the generator.