Filter
Top Products
GLOBUG LIGHTING SYSTEM — OPERATION AND PARTS MANUAL — REV. #2 (11/03/08) — PAGE 25
8. Install replacement lamp (Figure 37) into lamp socket
and turn lamp in a clockwise direction until tight.
LAMP
SOCKET
Figure 37. Installing Lamp
7. Remove lamp (Figure 36) from lamp scocket by turning
lamp in a counterclockwise direction.
LAMP
SOCKET
Figure 36. Removing Lamp
BALLOON
ENVELOPE
TOP
ZIPPER
BOTTOM
ZIPPER
Figure 38. Unzipping the Balloon Envelope
2. Slide the old or worn balloon envelope (Figure 39) over
the top of the lamp guard assembly.
BALLOON
ENVELOPE
LAMP
GUARD
Figure 39. Removing the Balloon Envelope
3. Slide the new balloon (Figure 40) envelope over the top
of the lamp guard assembly.
Replacing Balloon Envelope
1. Unzip the zipper (Figure 38) at the top and bottom of the
balloon envelope (cover).
BALLOON
ENVELOPE
LAMP
GUARD
4. Zip up the zipper (Figure 41) at the top and bottom of the
balloon envelope (cover).
Figure 40. Installing New Balloon Envelope
BALLOON
ENVELOPE
TOP
ZIPPER
BOTTOM
ZIPPER
Figure 41. Zipping the Balloon Envelope
GLOBUG SOLO Jr. LIGHTING SYSTEM — MAINTENANCE