Filter
Top Products
GLOBUG LIGHTING SYSTEM — OPERATION AND PARTS MANUAL — REV. #2 (11/03/08) — PAGE 17
GLOBUG GB12BW/BS/BP LIGHTING SYSTEM — SETUP (GB12BW)
2. Expose the balloon by pulling down on the velcro tab and
unzip the protective cover as shown in Figure 12. Also
remove the AC power cord at this time.
Figure 11. Light Assembly Placement
1. Place balloon assembly (Figure 11) onto mast and tighten
Upper T-handle.
MAST
UPPER
T-HANDLE
PROTECTIVE
COVER
LOWER
T-HANDLE
VELCRO
TAB
AC-POWER
CABLE
3. Next, fold the protective cover (Figure 13) into itself and
zip.
ZIPPER
PROTECTIVE
COVER
Figure 13. Folding Protective Cover
Figure 12. Removing Balloon/AC Power Cord
4. Connect the AC power cable (Figure 14) to the lamp
power cable.
Figure 14. Connecting Power Cables
Balloon Assembly Placement (GB12BW)