Filter
Top Products
15se c t i O n 4 — as s e M b l y & in s t a l l a t i O n
Note: For the chute elbow to be properly installed, the
bottom edge must fall over the bottom of the deck
opening. See Fig. 4-22.
Secure the chute elbow to the tractor’s deck by hooking 12.
the chute strap onto the ball pin installed earlier on the
deck. See Fig. 4-23.
Install the chute adapter onto the chute elbow by lining up 13.
the tabs and sliding the adapter over the chute elbow, as
in Fig. 4-24. Secure the chute adapter by installing the two
ratchet clips included in the hardware pack in the holes
provided.
With the bagger cover open, install the upper chute over 14.
the chute adapter, and rest the top so that the chute
support sits in the upper chute groove. See Fig. 4-25.
Note: Make sure to align the upper chute with the ridges
on the bagger support bracket.
Figure 4-22
Figure 4-24
Figure 4-25
Figure 4-23