Filter
Top Products
THE MINELAB EXPLORER II
78
ADVANCED USE
6
www.minelab.com
PHASE 3: Rejecting the framed target area
STEP 7 (Figure 6.11) To reject the area enclosed by the target
frame, press the center left shift button once. You will note
that a cross appears next to the button and the area of
screen within the target frame has darkened.
(Figure 6.12) It is now possible to drag the target frame to
the left to increase the rejected area until it connects to
the zone rejected previously.
NOTE To accept the framed area, press the center left
shift button until a tick appears next to the button. This
instructs the Explorer II to clear the framed area.
PHASE 4: Saving edited discrimination pattern
STEP 8 (Figure 6.13) To save the edited discrimination pattern,
press the Main Menu shortcut button and select SAVE
from the displayed menu.
STEP 9 Press the shift button corresponding to the location you
want to save it (e.g. S2).
STEP 10 Now you can recall your edited discrimination pattern from
the SELECT target list.
NOTE The last saved discrimination pattern is retained in
the SELECT menu as Advanced mode’s current setting.
Figure 6.13 Saving discrimination pattern
Figure 6.11 Rejecting framed target area
EDITING AND SAVING TARGETS
tutorial
!
EDITING AND SAVING TARGET PATTERNS
... continued
Figure 6.12 Target frame dragged to
complete discrimination pattern