Filter
Top Products
THE MINELAB EXPLORER II
90
USER INFO
7
www.minelab.com
Clearing saved patterns
HELPFUL HINTS
user tips
It is normal for the tip of the rechargeable battery to get warm while
charging because the current regulator is mounted inside the
battery pack.
Using headphones extends battery life. The speaker draws
significant current from the battery for short amounts of time. Using
the headphones when the battery voltage is low (when the battery
indicator’s level starts decreasing) helps in getting the most out of
the battery.
It is best if you perform a Noise Cancel with the search coil in the
position used for detection. This is because the interference picked
up in a vertical position can be different from the interference
picked up in the horizontal orientation.
In competitions, where several Explorer IIs have to work nearby, it
might be best to select the channels manually.
If you want to know what channel has been chosen by the detector
after a Noise Cancel, go into the Advanced mode in Main Menu >
Options > NOISE and look at the number displayed. If you do a
Noise Cancel while in that menu, you have to go out of the menu
and back to get the new channel number.
If you want to clear one or more patterns from the SAVE DISCRIM
menu, do the following:
STEP 1 Go to SELECT menu and select CLEAR.
STEP 2 Go to the SAVE menu and save cleared screen into the
locations you want.
HELPFUL HINTS
Batteries
Noise Cancel
These tips are provided to enhance your personal use of the Explorer II. They are
intended to work together with the information and instructions appearing elsewhere
in the manual.