Filter
Top Products
THE MINELAB EXPLORER II
65
QUICKSTART
5
$
ADVANCED MODE OPTION
Moving to Advanced mode
Figure 5.28, 5.29
Main Menu > Options > ADVANCED
Press the MENU shortcut button, select OPTIONS from the
displayed list and then select ADVANCED mode.
The detector moves into ADVANCED mode and a new OPTIONS
menu appears displaying the broader array of options available to
you in Advanced mode.
If you are ready for advanced detecting, read through Chapter 6:
Advanced Use. It is likely you will only need to return to this
chapter for background on basic adjustments and general
detector operation.
Just remember that it is always possible to return to Quickstart
mode. If at any time you become a little confused with the settings
for your detector, or just want to brush up on basic detector use, it
is simple to reset the Explorer II to its original factory settings. To
reset the detector:
• Turn the detector off
• Press and hold the POWER button until a six-note musical tune
is sounded. The Minelab logo and the words ‘Factory Presets’
will be briefly displayed on screen.
You will be returned to the original Quickstart settings and you may
resume basic detecting or make selections from the Main Menu.
You are now ready to proceed to Chapter 6: Advanced Use.
Figure 5.28 Options screen in Quickstart
Once you have experimented with target options and the other features of Quickstart,
it may be time to investigate the features of the Explorer II available to the advanced user.
ADVANCED MODE OPTION
Figure 5.29 Options screen in Advanced