Filter
Top Products
MAINTENANCE
RCX400 telescopes are precision optical instruments designed to yield a lifetime of
rewarding applications. Given the care and respect due any precision instrument, your
RCX400 will rarely, if ever, require factory servicing. Maintenance guidelines include:
a.
Avoid cleaning the telescope’s optics: A little dust on the front surface of the tele-
scope’s correcting lens causes virtually no degradation of image quality and
should not be considered reason to clean the lens
.
b. When absolutely necessary, dust on the front lens should be removed with gen-
tle strokes of a camel hair brush or blown off with an ear syringe (available at any
pharmacy). DO NOT use a commercial photographic lens cleaner.
c. Organic materials (e.g., fingerprints) on the front lens may be removed with a
solution of 3 parts distilled water to 1 part isopropyl alcohol.You may also add 1
drop of biodegradable dishwashing soap per pint of solution. Use soft, white facial
tissues and make short, gentle strokes. Change tissues often.
Caution: Do not use scented or lotioned tissues or damage could result
to the optics.
d. Do not, for any reason, remove the correcting plate from its machined housing for
cleaning or other purposes. You will almost certainly not be able to replace the
corrector in its proper rotational orientation and serious degradation of optical
performance will result. Meade Instruments assumes no liability for damage
incurred to the telescope in this way.
e. If the
RCX400 is used outdoors on a humid night, water condensation on the tel-
escope surfaces will probably result. While such condensation does not normally
cause any damage to the telescope, it is recommended that the entire telescope
be wiped down with a dry cloth before the telescope is packed away.Do not, how-
ever, wipe any of the optical surfaces. Rather, simply allow the telescope to sit for
some time in the warm indoor air, so that the wet optical surfaces can dry unat-
tended.
f. If your
RCX400 is not to be used for an extended period, perhaps for one month
or more, it is advisable to remove the batteries from the telescope. Batteries left
in the telescope for prolonged periods may leak, causing damage to the tele-
scope’s electronic circuitry.
g. Do not leave your
RCX400 inside a sealed car on a warm summer day; excessive
ambient temperatures can damage the telescope’s internal lubrication and elec-
tronic circuitry
.
Collimation
The optical collimation (alignment) of any astronomical telescope used for serious pur-
poses is important, but in the case of the RCX design, such collimation is absolutely
essential for good performance.Take special care to read and understand this section
well so that your telescope will give you the best optical performance.
As part of final optical testing, every Meade RCX400 telescope is precisely collimated
at the Meade factory before shipment. However, vibrations in shipping can cause the
optical system to become misaligned. Re-aligning the optics is, however, a straight-
forward process with the RCX400.
Test your Collimation
Before collimating your RCX400, you will need to test your collimation.
To test the collimation, center a bright star that is overhead, or use a “hot spot” of
reflected Sunlight from a chrome car bumper, with the supplied 24mm eyepiece. Allow
the telescope to adjust to the temperature of your observation site before proceeding;
temperature differences between the optics and the outside air can cause distortion in
the images. Autostar II offers two options in the Utilities menus that take temperature
readings: “OTA Temperature” (the temperature of the corrector plate) and “Ambient
T
emper
ature”
(the temper
ature of the air around the f
or
k ar
ms).
When the star or hot spot is centered, de-focus the image.You will notice that the out
of focus star image looks like a ring of light surrounding a dark central spot; the dark
centr
al spot is in f
act the shado
w of the secondar
y mirror
.
Y
ou may notice multiple
51