Filter
Top Products
P 7/ 25
Repair
(1) Align the Shear blade (upper) with the lower one. (Fig. 11)
(2) Set 2 pcs. of Sleeve 5 under Plate of Shear blade assembly. (Fig. 12)
(3) Set the position of Spur gear 43 as drawn in Fig. 13.
DISASSEMBLING
ASSEMBLING
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Shear Blade
Remove Holder and Shear blade assembly by unscrewing two Hex socket head bolts. (Fig. 10)
Note: 2 pcs. of Sleeve 5 are mounted under Plate. Do not lose them. (Fig. 12)
Note:
Holder and Washer are fastened with Hex socket
head bolts. Do not lose them when removing
Shear blade assembly.
Fig. 10
Fig. 11
Fig. 13
Shear blades
Gear case
Holder
Spur gear 43
Washer
Hex socket head bolt
Seal
Plate
Shear blades
Sleeve 5
Fig. 12