Filter
Top Products
Repair
[3] DISASSEMBLY/ASSEMBLY
[3] -8. Carburetor (cont.)
(2) Fasten the following parts with two Hex socket head bolts. (Fig. 39)
* Plate
* Air cleaner plate
* Gasket
* Cable bracket
* Gasket
* Carburetor assembly
* Carburetor gasket
Fig. 39
(3) Assemble Elements. (Fig. 40)
ASSEMBLING CARBURETOR TO ENGINE
Air cleaner plate
Hex socket
head bolt
(2pcs.)
Gasket
Carburetor gasket
Carburetor
assembly
Cable bracket
Gasket
Air cleaner plate
2. Fit the tab of Air cleaner plate with the square hole of
Air cleaner cover and fasten Air cleaner cover
with a screw.
Air cleaner cover
Plate
Note 1:
Assemble plate to Air cleaner plate
while facing its triangle side to
Starter case side.
Note 3:
Make sure that Gaskets
are mounted to the both
side of Cable bracket.
Starter case
Note 2:
Assemble Carburetor gasket
while facing its cut portion
to Loop handle side.
1. First, assemble Felt element, and then, Sponge element.
Fig. 40
Tab of
Air cleaner plate
Square hole
for tab
Element (felt)
Element (sponge)
P 19/ 25