Filter
Top Products
P 13/ 25
Repair
DISASSEMBLING
ASSEMBLING
Fly Wheel
(1) Remove oil completely from Crankshaft.
(2) Align Woodruff key on Crank shaft to the key groove of Fly wheel and mount Fly wheel to Crankshaft.
(3) Turn M6 Hex nut to Crankshaft clockwise by hand and tighten it with Impact driver with 10 mm Socket bit
clockwise for 2 second.
(1) Remove Recoil starter assembly from Blower housing.
Note: Record the position and the pulling direction of Starter knob before disassembling. (Fig. 26)
Fig. 25
Woodruff Key
2. Align this Key to the groove
in the Fly wheel.
[3] -7. Recoil Starter
Fig. 26
Starter knob
Pulling direction
Blade sideLever case side
Recoil starter assembly
[3] DISASSEMBLY/ASSEMBLY
[3] -6. Ignition (cont.)
1. Remove Oil completely
from Crankshaft.