Filter
Top Products
P 14/ 25
Repair
Fig. 27
DISASSEMBLING
[3] DISASSEMBLY/ASSEMBLY
[3] -7. Recoil Starter (cont.)
(2) Disassemble Recoil starter. (Fig. 27)
Reel
Reel
Notch
Notch
Rope
1. Pull out Rope by the length of one or two times
turn of the Reel and hold the Reel.
2. Release Starter knob while holding the Reel with
your finger and pull the slack Rope inside.
Hook the Rope in the notch and turn the Reel
counterclockwise while braking the Reel and
holding the Rope. Turn Reel until
Spiral spring recoil force is gone.
Rope
Starter knob
Starter
case
3. Remove Set screw, Cam and Torsion spring.
4. Remove Reel from Starter case.
Note: Do not let Spiral spring leap out
in this step.
Set screw
Cam
Reel Torsion spring
Reel
Spiral spring