Filter
Top Products
P 18/ 25
Repair
Assemble by reversing the disassembly, cleaning procedure.
See Fig. 37.
(1) Connect two Tubes to Carburetor. (Fig. 38)
ASSEMBLING
AIR-TIGHT TEST
Fig. 37
Nipple for
fuel intake
1R127
1. Connect 1R127 to Carburetor.
2. Push up the air pressure until
the pressure gauge indicates
0.05 Mpa.
3. The Carburetor is in order
if the air pressure of 0.05 Mpa
can be kept for 10 seconds.
Carburetor
ASSEMBLING CARBURETOR TO ENGINE
Fig. 38
Nipple for
fuel intake
Black Tube
Clear Tube
Push
[3] DISASSEMBLY/ASSEMBLY
[3] -8. Carburetor (cont.)