Filter
Top Products
4
FE
A
B
C
D
2
3
1
4
SAFETY PRECAUTIONS
General precautions
- The operator MUST read this instruction manual to ensure
safe operation (even if you already have experience in
using cutoff saws). It is important to be familiar with the
operation of this particular cutoff saw. Users insufficiently
informed will endanger themselves as well as others due to
improper handling.
- Let only persons who have experience in using cutoff saws
work with this unit. When letting another person use the Power
Cut, this instruction manual must be provided along with it.
- First-time operators should ask a specialist to instruct them in
working with gasoline-powered cutoff saws.
- Children and persons under 18 years of age must not be
allowed to use this Power Cut. Persons over the age of 16
years may, however, use the Power Cut for the purpose of
being trained as long as they are under the supervision of a
qualified trainer.
- Working with the Power Cut requires high concentration.
- Operate the Power Cut only if you are in good physical
condition. If you are tired, your attention will be reduced. Be
especially careful at the end of a working day. Perform all work
calmly and carefully. The user has to accept liability for others.
- Never work while under the influence of alcohol, drugs, medi-
cation or other substances which may impair vision, dexterity
or judgement.
- A fire extinguisher must be available in the immediate vicinity
when working in easily inflammable vegetation or when it has
not rained for a long time (danger of fire).
- Asbestos and other materials that can release toxins may be
cut only with the necessary safety precautions and after
notification of the proper authorities and under their supervi-
sion or that of a person appointed by them.
Protective equipment
- In order to avoid head, eye, hand or foot injuries as well as
to protect your hearing the following protective equip-
ment must be used during operation of the Power Cut:
- The kind of clothing should be appropriate, i. e. it should be
tight-fitting but not be a hindrance. Clothing in which grains of
material can accumulate (trousers with cuffs, jackets and
trousers with wide-open pockets, etc.) must not be worn,
particularly when cutting metal.
- Do not wear any jewellery or clothing that can get caught or
distract from the operation of the Power Cut.
- It is necessary to wear a protective helmet whenever working
with the Power Cut. The protective helmet (A) is to be
checked in regular intervals for damage and is to be replaced
after 5 years at the latest. Use only approved protective
helmets.
- The helmet visor (B) protects the face from dust and material
grains. In order to prevent injuries to eyes and face, always
wear protective goggles (C) or visor when using the Power
Cut.
- To prevent hearing damage, always wear suitable personal
hearing protection. (ear muffs (D), ear plugs, etc.). Octave
brand analysis upon request.
- When dry-cutting dust-producing materials such as stone or
concrete, always wear approved respiratory protection (E).
- Work gloves (F) of tough leather are part of the required work
kit of the Power Cut and must
always be worn when working
with the Power Cut.