Filter
Top Products
16
A
Stopping the engine
Push the combination switch (1) down to position .
ST
O
P
1
Working in winter
In conditions of low temperatures and high humidity the
carburetor can ice up. To prevent this, at temperatures below
0° C / 32° F hot air from the cylinder chamber can be inducted.
This also brings the engine to operating temperature faster.
At temperatures above freezing the carburetor must NOT
be fed heated air.
Failure to follow these instructions can lead to damage to
the cylinder and piston!
B
Turn the cover lock (2) to the ”unlocked ” position and
carefully remove the filter cover (3).
C
2
3
STOP
Take the filter element (4) out of the filter cover.
Take the summer-winter insert out of the summer position (7)
and press it in as illustrated in the winter position (8)
NOTE: At temperatures over 0° C / 32° F the summer-winter
insert should always be placed in the summer position (7).
NOTE: When placing the filter element (4) in the filter cover,
position it with the angled corner (5) against the angled corner
in the inside of the cover.
D
87
5
6
4
STOP