Land Pride SC2672 Brush Cutter User Manual


 
SC2660 & SC2672 Skid Steer Rotary Cutter 326-025M
1/07/09
Land Pride
Table of Contents
© Copyright 2009 All rights Reserved
Land Pride provides this publication “as is”without warranty ofany kind, eitherexpressed orimplied. While every precautionhas been takenin the preparationof this manual, Land
Pride assumesno responsibilityforerrors oromissions.Neither isany liabilityassumedfor damagesresultingfrom theuse ofthe informationcontained herein.Land Pride reserves
the rightto revise andimproveits productsas itsees fit.This publicationdescribes thestate ofthis productat the timeof itspublication,and may notreflect theproduct inthe future.
Land Pride is aregistered trademark.
All other brands and productnames are trademarks or registeredtrademarks of their respective holders.
Printed in the United States of America.
Important Safety Information . . . . . . . . . . .1
Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1
Look For The Safety Alert Symbol . . . . . . . . . . . . . 1
Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Introduction . . . . . . . . . . . . . . . . . . . . . . . .7
Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 7
Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 8
Serial Number Plate . . . . . . . . . . . . . . . . . . . . . 8
Further Assistance . . . . . . . . . . . . . . . . . . . . . . 8
Section 1: Assembly & Set-up . . . . . . . . . .9
Skid Steer Requirements . . . . . . . . . . . . . . . . . . . . 9
Dealer Preparations . . . . . . . . . . . . . . . . . . . . . . . . 9
Pre-Assembly Checklist . . . . . . . . . . . . . . . . . . . . . 9
Uncrating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Float Chain Assembly . . . . . . . . . . . . . . . . . . . . . . 9
SC2660 Motor And Hose Assembly . . . . . . . . . . . 10
SC2672 Motor And Hose Assembly . . . . . . . . . . . 10
SC2672 Vent Plug With Dipstick . . . . . . . . . . . . . 10
Hitch Hook-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Hydraulic Hose Hook-up . . . . . . . . . . . . . . . . . . . 11
Gauge Wheel Assembly (Optional) . . . . . . . . . . . 12
Skid Shoe Assembly (Optional) . . . . . . . . . . . . . . 13
Operator Protective Door (Optional) . . . . . . . . . . 13
Section 2: Adjustments . . . . . . . . . . . . . .14
Hitch Positioning . . . . . . . . . . . . . . . . . . . . . . . . . 14
Hitch Mounted Offset . . . . . . . . . . . . . . . . . . . 14
Hitch Mounted Centered . . . . . . . . . . . . . . . . . 14
Height Adjustment Safety Chain . . . . . . . . . . . . . 15
Deck Leveling with Optional Gauge Wheel . . . . . 16
Deck Leveling without Optional Gauge Wheel . . . 17
Section 3: Operating Procedures . . . . . .18
Operating Information . . . . . . . . . . . . . . . . . . . . .18
Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Cutting Instructions . . . . . . . . . . . . . . . . . . . . . . .19
General Operating Instructions . . . . . . . . . . . . . .19
Skid Steer Operating Instructions . . . . . . . . . .20
Rotary Cutter Operating Instructions . . . . . . . .20
Section 4: Optional Equipment . . . . . . . .21
Front Mounted Gauge Wheel . . . . . . . . . . . . . . . .21
Skid Shoe Bundles . . . . . . . . . . . . . . . . . . . . . . . .21
Motor and Hose Assembly . . . . . . . . . . . . . . . . . .21
Extended Hose Kit . . . . . . . . . . . . . . . . . . . . . . . .22
Operator Protective Door . . . . . . . . . . . . . . . . . . .22
Section 5: Maintenance & Lubrication . .23
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Cutter Blade Maintenance . . . . . . . . . . . . . . . . . .23
Skid Shoe Maintenance . . . . . . . . . . . . . . . . . . . .24
Hydraulic Maintenance . . . . . . . . . . . . . . . . . . . . .25
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Lubrication Points . . . . . . . . . . . . . . . . . . . . . . . .26
Lubrication Points . . . . . . . . . . . . . . . . . . . . . . . .26
Hitch Plate Pivot . . . . . . . . . . . . . . . . . . . . . . .26
Gauge Wheel Parallel Arms . . . . . . . . . . . . . .26
Gauge Wheel Spindle & Axle Hub . . . . . . . . . .26
Axle Hub Bearing . . . . . . . . . . . . . . . . . . . . . .26
Motor Spindle Hub (SC2660 Only) . . . . . . . . .27
Gearbox (SC2672 Only) . . . . . . . . . . . . . . . . .27
Section 6: Specifications & Capacities . .28
Section 7: Features and Benefits . . . . . .29
Section 8: Troubleshooting . . . . . . . . . . .30
Section 9: Appendix . . . . . . . . . . . . . . . . .31
Torque Values Chart . . . . . . . . . . . . . . . . . . . . . .31
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Table of Contents