Filter
Top Products
14
Section 2: Adjustments
SC2660 & SC2672 Skid Steer Rotary Cutter 326-025M
1/07/09
Land Pride
Table of Contents
Hitch Positioning
Refer to Figure 2-1:
The Rotary Cutter hitch is designed to be centered on the
cutter or offset to position the cutter to the right.
Offsetting the cutter to the right will allow the unit to cut
close to obstacles.
Hitch Mounted Offset
1. Align hitch pivot pin bushings (#3) with cutter
mounting lug holes (A1).
2. Insert hitch pivot pins (#7) through mounting lug holes
(A1) and hitch bushings (#3).
3. Secure pivot pins by driving roll pins (#6) through pivot
pin holes.
4. Attach Floating Chains (#4) to hitch plate lugs at
positions marked (B1) with chain pins (#5).
5. Insert cotter pins (#2) through chain pin holes and bend
one leg of each cotter pin to secure it in place.
Hitch Mounted Centered
1. Align hitch pivot pin bushings (#3) with cutter
mounting lug holes (A2).
2. Insert hitch pivot pins (#7) through mounting lug holes
(A2) and bushings (#3).
3. Secure pivot pins by driving roll pins (#6) through pivot
pin holes.
4. Attach Floating Chains (#4) to hitch plate lugs at
position (B2) with chain pins (#5).
5. Insert cotter pins (#2) through chain pin holes and bend
one leg of each cotter pin to secure it in place.
Section 2: Adjustments
Hitch Offset
Figure 2-1
24548