Filter
Top Products
7
Introduction
12/15/15
RCF2760 and RCF2772 Rotary Cutters 326-460M
Table of Contents
Introduction
Owner Assistance
The Online Warranty Registration should be completed
by the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
Model No. _____________Serial No. ______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 33. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number.
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure that person is aware of any
problems you may have and has had the opportunity
to assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
30947
Land Pride welcomes you to the growing family of new
product owners.
This Rotary Cutter has been designed with care and built
by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from this machine.
Application
The RCF2760 and RCF2772 Series Rotary Cutters are
designed and built by Land Pride to provide excellent
cutting performance on gentle slopes, slightly contoured
right-of-ways, roadsides, pastures, set-aside-acres,
around the farm, and around town. They are compatible
with 35 to 130 horsepower tractors with a category I or II
three-point hitch and 540 RPM PTO speed. The cutters
are Quick Hitch adaptable and equipped with an ASAE
category 4 driveline with 4-plate slip-clutch for protection.
RCF27 Series cutters with 1 1/2" to 12" cutting height
range, can cut through grass, weeds, crops, brush, and
small trees up to 3 inches in diameter with a blade tip
speed of 12,384 FPM for the RCF2760 and 14,861 FPM
for the RCF2772. These units come equipped standard
with a 3/16" thick heavy-duty stump jumper and
replaceable bolt-on skid shoes. Optional shields for the
front are rubber deflector and single chain guard.
Optional shield for the rear is single chain guard.
See “Specifications & Capacities” on page 28 and
“Features & Benefits” on page 30 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology:
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions:
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.