Filter
Top Products
30
Section 7: Features & Benefits
RCF2760 and RCF2772 Rotary Cutters 326-460M
12/15/15
Table of Contents
Section 7: Features & Benefits
RCF2760 & RCF2772 Models
Features Benefits
Surpassed rugged
industry standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary
testing procedures specified by ANSI.
5 Year gearbox warranty Shows our confidence in the gearbox integrity.
130 HP gearbox A rugged heavy built gearbox capable of handling heavy cutting applications.
Gearbox Seal Protection Gearbox bottom seal protection for longer bearing life.
Cat. 4 driveline with
4-plate slip-clutch
Slip-clutch driveline offers convenience for continual work.
Lower clevis type
3-point hitch
Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even
pull from the tractor’s lower arms, vs. pulling on a single pin design.
Heavy 10 gauge deck
construction with 1/4" side skits
Can withstand more abuse than lighter gauge decks.
Box tubing deck supports Makes for a stronger rigid deck.
Fully welded deck Adds additional strength.
Round back design Helps discharge grass better than enclosed or partially enclosed cutters.
11 1/4" Deck Height Allows cutter to handle heavy cutting conditions.
1 1/2" to 12" Cutting height Provides for a wide range of cutting conditions.
High cutting capacity Can cut brushy areas with saplings up to 3".
Skid shoes Provides sidewall reinforcement and protection to bottom of sidewall.
1/2" x 4" Heat-treated
free swinging blades
Free swinging protects from obstructions. Heat-treated offers longer life.
Splined blade bar hub Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
3/16" Plate stump jumper Standard round stump jumper slides over stumps, rocks, and debris.
High blade tip speed
RCF2760 = 12,384 FPM
RCF2772 = 14,861 FPM
Ensures clean cut.
Laminated tailwheel Laminated material is long lasting in rough conditions.
4" x 15" Solid rubber tailwheel Can’t go flat.
1 1/2" Heavy-duty spindle
on tailwheel
Tailwheels take a beating, spindle gives the strength to protect tailwheel assembly.
Optional Guarding
Protect against flying debris. Customer can choose to include single chain or rubber
guarding on the front and single chain guarding on the back.
Driveline Holder Keeps driveline up out of dirt. Easier hook up of driveline.