Land Pride RC5015 Brush Cutter User Manual


 
29
Section 5: Maintenance & Lubrication
8/28/08
RC5015 & RC6015 (540 RPM) and RCM5015 & RCM6015 (1000 RPM) Rotary Cutters 318-047M
Land Pride
Table of Contents
Skid Shoe Maintenance
!
WARNING!
Excessive wear on skid shoes may cause inadequate operation
of cutter and create a safety hazard!
There are two skid shoes mounted on either side of the
center section and one skid shoe mounted on each wing
section. Check all skid shoes for wear and replace if
necessary. Order only genuine Land Pride parts from
your local Land Pride Dealer.
Center Skid Shoe
Refer to Figure 5-9:
Replace center skid shoes as follows:
1. Remove 1/2"-13 hex whiz nuts (#2), 1/2" -13 x 2” gr8
hex bolts (#3) and center skid shoe (#1) as shown.
2. Attach new skid shoe (#1) to cutter with existing
1/2” hex bolts (#3), existing top plate (#4) and secure
with existing 1/2" hex whiz nuts. Torque to 105 ft. lbs.
3. Repeat on opposite side of center section.
Center Skid Shoe
Figure 5-9
Land Pride Skid Shoe Replacement Parts
Part No. Part Description
318-145H CENTER SKID SHOE (RH)
318-146H CENTER SKID SHOE (LH)
318-335D WING SKID SHOE (S/N292792+)
802-466C PLOW BOLT, 3/8" - 16 x 1 1/1/4" grade 5
23568
Wing Skid Shoe
Refer to Figure 5-10:
Replace wing skid shoes as follows:
1. Remove 3/8" hex whiz nuts (#3), 3/8" plow bolts (#2)
and wing skid shoe (#1) as shown.
2. Plow bolts (#2) should be checked for wear and
replaced if necessary.
3. Attach new skid shoe (#1) to cutter with existing
3/8” plow bolts (#2) and secure with 3/8" hex whiz
nuts. Torque to 31 ft. lbs.
4. Repeat on opposite wing section.
Wing Skid shoe
Figure 5-10
Tractor Maintenance
One of the most important things you can do to prevent
hydraulic system problems is to ensure that your tractor's
reservoir remains free of dirt and contamination.
Use a clean cloth to wipe the hose ends before attaching
them to your tractor. Replace the filter element for your
tractor’s hydraulic system at the prescribed intervals.
These simple maintenances will go a long way to prevent
the occurrence of control valve and hydraulic cylinder
problems.
22173
Skid shoe
is reversible