Filter
Top Products
4
Important Safety Information
PS25120 Primary Seeder 313-156M
8/21/06
Land Pride
Table of Contents
818-003C
Slow Moving Vehicle Label
(also found on Small
Seeds Attachment)
12790
818-230C
Red Reflector
18938
818-230C
Red Reflector
(also found on Walkboard)
12788
Safety Labels
Your Primary Seeder comes equipped with all safety labels in
place. They were designed to help you safely operate your
implement. Read and follow their directions.
1. Keep all safety labels clean and legible.
2. Replace all damaged or missing labels. To order new
labels go to your nearest Land Pride dealer or visit our
dealer locator at landpride.com.
3. Some new equipment installed during repair requires
safety labels to be affixed to the replaced component as
specified by Land Pride. When ordering new components
make sure the correct safety labels are included in the
request.
4. Refer to this section for proper label placement.
To install new labels:
a. Clean the area the label is to be placed.
b. Spray soapy water on the surface where the label is to
be placed.
c. Peel backing from label. Press firmly onto the surface.
d. Squeeze out air bubbles with the edge of a credit card.