Filter
Top Products
37
Section 3: Adjustments
8/21/06
PS25120 Primary Seeder 313-156M
Land Pride
Table of Contents
Agitator Attachment (Optional)
Engaging & Disengaging the Agitator
Sprocket
Refer to Figure 3-6:
To engage agitator pull spring-loaded pin (#1) and place
in Position 1 making sure the sprocket is connected by
rotating the lockout hub (#2) clockwise until it is locked.
Position 1
Figure 3-6
Refer to Figure 3-7:
To disengage the agitator, pull spring-loaded pin (#1)
and place in Position 2 making sure the lockout hub (#2)
turns freely.
Position 2
Figure 3-7
13293
13296
Calibrating and Adjusting Seed Rate
Follow directions see “Calibrating & Adjusting Seeding
Rate” on page 20 and Seed Rate Charts on page 25 and
page 28.
Coil Tines (Optional)
Height Adjustment
Adjust height as needed, see Figure 3-8.
Coil Tines Height Adjustment
Figure 3-8
Danish Tines (Optional)
Height Adjustment
Adjust height as needed, see Figure 3-9.
Danish Tines Height Adjustment
Figure 3-9
13303
13302