Filter
Top Products
26
Section 6: Features & Benefits
DM3705, DM3706, and DM3707 Series Disc Mowers 327-083M
9/15/06
Table of Contents
Section 6: Features & Benefits
DM37 Series Disc Mowers
Features Benefits
Cutter bar 81”, 96” and 112” widths 5, 6 and 7 Disc models available to meet a wide range of customer needs.
Common oil chamber Gears splash oil from gear to gear.
Warranty 2 Years Parts & Labor on cutter bar and gearbox. One year Parts & Labor on hydraulic
cylinder, hydraulic hoses, and seals are considered wear items.
Cutting blades and belts are considered wear items.
Maximum cutting angle
(Angle cutter bar is to tractor axle)
35 Degrees down, and 35 degrees up for cutting along embankments.
Narrow transport 74” - usually not much wider than tire distance, safer in transport.
Hook-ups Three types of hook-ups. Cat. 2, Cat. 2 Quick-Hitch, and Cat. 3.
Rock guards Replaceable.
Hydraulic cutterbar lift Quickly raise for obstructions.
Cutterbar drive Gear drive for high efficiency and long life.
1 1/4” Minimum cutting height Run skid shoes on ground to mow very short.
Power drive belt Stronger than multiple belt system.
2 hardened blades per disc,
reversible
Reversible blades give double life, hardened for longevity against debris.
3” Blade overlap Eliminates skipping for a cleaner cut.
High blade tip speed 15,764 fpm, offers a nice clean cut.
Storage stand Aids in storage and hooking to tractor.
Skid shoes Easily replaceable when worn out.