Filter
Top Products
30
Section 5: Maintenance and Lubrication
AFM4522 All Flex Grooming Mower 315-360M
11/14/08
Land Pride
Table of Contents
DDriveline Shafts
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
13667
Lubrication
50
Multi-purpose
spray lube
Multi-purpose
grease lube
Intervals in hours
at which lubrication
is required
Lubrication
Legend
Multi-purpose
oil lube
25
Hours
Inner Tube of Driveline
Type of Lubrication: Wheel Bearing Grease
Disconnect Driveline from the tractor and slide apart. Clean
and coat the inner tube of the Driveline with a light film of
grease and then reassemble.
12729
Inner
Tube
50
Hours
Driveline Constant Velocity Shaft
Type of Lubrication: Multi-purpose Grease
Quantity = See drawing
IMPORTANT: Extensive lubrication must be
performed every 8 hours of operation to extend the
life of the constant velocity joint!
• Grease constant velocity joint in a straight position
to force grease through its passages and into the
cavity. Grease should be visible around ball joints.
• Grease fittings in the outer telescoping member,
u-joints and driveline shields every 8 hours of
operation to prevent premature break down.
12726
8
Hours