Filter
Top Products
40
Section 5: Specifications & Capacities
Z44 & Z52 (S/N 472620 -526170) Zero Turning Radius Mowers Riding Mowers Accu-Z Razor
®
357-044M
2/27/07
Land Pride
Table of Contents
Ground Speed Forward: 0-7 MPH
Reverse: 0-5 MPH
Steering Type Twin lever steering provides independent control of each drive wheel.
Twin Lever Steering Controls Speed, forward, reverse, brake, and turns.
Steering Turning Radius True zero degree. Turns with counter-rotating independent drive wheels
Brake Service Hydrostatic dynamic braking
Parking Lever applied pawl and cog wheel
Mower Drive Single V-belt with electric clutch and spring tension idler pulley
Safety Features Operator presence system connected to deck and drive clutches.
Seat Molded-vinyl seat. Bolt loosening required for forward and reverse adjustments.
Optional armrests kit for standard molded-vinyl seat.
Optional deluxe cushion seat with arm rests.
Mainframe Construction 1 1/2" square solid steel.
Drive Motor Mount 1/8” welded steel
Front Caster Wheels Mounted with roller bearings on each wheel.
Front Caster Forks 3/8” steel.
Deck Thickness 11 Gauge decks with reinforcements welded into spindle mount areas
Box-Section Reinforced Front
Edge
11 GA. x 3 1/2" x 1 1/2” Box
Deck Trim Edges Solid 1” x 3/8” steel bars for reinforced impact area
Deck Housing Depth 4 1/8” deep, (room for high-capacity mowing)
Deck Lift Foot-operated deck height adjustment.
Pin for setting height and transport position.
Hand Operated Controls Ignition switch, throttle lever, control levers, blade engagement switch,
choke lever and Left/Right Fuel Tank Valve.
Indicators Engine warning light and hour meter
Cup Holder Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size including Big Gulp.
Cutting Heights Foot-operated deck height adjustment. Pin for setting height, transport position.
Height adjustment in 1/4" increments from 1 1/2” to 4 1/2”
Mowing Blades Heavy-duty, heat-treated, high-lift steel blades
.20" x 2 1/2" x 15.81" .20 x 2 1/2” x 17.81”
Blade Tip Speed 16,811 FPM 18,937 FPM
Blade Drive V-belt drive to all three spindles. Spring tension idler pulleys.
Spindles Machine ductile housing, 1" diameter high carbon steel shafts
and greasable ball bearings.
Flotation Free-floating mower using three blades with center blade to the front.
Mower is suspended at the four corners on spring-assisted chains.
Includes 4 anti-scalp wheels to improve flotation in rolling and uneven terrain.
Z44 & Z52 Accu-Z Razor
®
(General Specifications)
Z44 Z52