Filter
Top Products
Model: 308-2316 www.lacrossetechnology.com/support Page | 14
39.Press the ALARM button to exit alarm settings.
Note: There is only one time alarm. Set the time alarm in the high or low alarm setting mode.
Low Alarms:
1. Press the ALARM button once to enter HI Alarm mode (LOAL will show in the date display).
Press the SET button to select the Time Alarm. The Hour will flash.
2. Press the + or MIN/MAX buttons to adjust the hour.
3. Press the SET button to select the minutes. The Minutes will flash.
4. Press the + or MIN/MAX buttons to adjust the minutes.
5. Press the ALARM button to activate or deactivate the alarm.
6. Press the SET button to select the Indoor Humidity Low Alarm.
7. Press the + or MIN/MAX buttons to adjust the humidity value.
8. Press the ALARM button to activate or deactivate the alarm.
9. Press the SET button to select the Indoor Temperature Low Alarm.
10.Press the + or MIN/MAX buttons to adjust the temperature value.
11.Press the ALARM button to activate or deactivate the alarm.
12.Press the SET button to select the Outdoor Humidity Low Alarm.
13.Press the + or MIN/MAX buttons to adjust the humidity value.
14.Press the ALARM button to activate or deactivate the alarm.
15.Press the SET button to select the Outdoor Temperature Low Alarm.
16.Press the + or MIN/MAX buttons to adjust the temperature value.
17.Press the ALARM button to activate or deactivate the alarm.
18.Press the SET button to select the Wind Chill Low Alarm.
19.Press the + or MIN/MAX buttons to adjust the wind chill value.
20.Press the ALARM button to activate or deactivate the alarm.
21.Press the SET button to select the Dew Point Low Alarm.
22.Press the + or MIN/MAX buttons to adjust the dew point value.
23.Press the ALARM button to activate or deactivate the alarm.
24.Press the SET button to select the Pressure Low Alarm.
25.Press the + or MIN/MAX buttons to adjust the pressure value.
26.Press the ALARM button to activate or deactivate the alarm.
27.Press the ALARM button to exit alarm settings.
Activate/Deactivate Hi and Low Alarms
1. Press the ALARM button to enter HI Alarm (HIAL) or LO Alarm (LOAL) mode.
2. Press the SET button to select an alarm value to change.
3. With alarm value flashing, press the ALARM button to activate or deactivate
individual alarms.
4. When active (ON) the alarm icon will show.
5. When the alarm is inactive (OFF) the alarm icon will not show.
When an alarm sounds and flashes
Alarm will sound for two minutes.
Press any button to silence the alarm.
Active
Alarm
Icon