Filter
Top Products
Model: 308-2316 www.lacrossetechnology.com/support Page | 15
The alarm will flash until the weather condition is no longer valid. The alarm will flash even
when sound is silenced.
When the alarm threshold is met, the alarm will reactivate automatically.
Deactivate the alarm or set it to a new value to avoid repeated alarms.
History Mode
History mode allows you to view data records over the past 24 hours. These
records are a snapshot of information recorded every 3 hours from setup.
1. Press the HISTORY button to enter history mode. The letters HIS will show in
the date area.
2. Press the + button to view records over the past 24 hours at increments of -3
hours, -6 hours, -9 hours, -12 hours, -15 hours, -18 hours, -21 hours, -24
hours.
3. Press the HISTORY button to exit history mode.
MIN/MAX Mode
There are thirteen maximum records and seven minimum records to view with time and date of
occurance. You may choose to view and/or reset any or all of these records.
1. Press the MIN/MAX button once to enter MAX mode.
2. Press the MIN/MAX button twice to enter MIN mode.
3. Press the + button to view individual MAX or MIN values with time and date stamp.
4. RESET: When viewing individual MAX/MIN values with time and date stamp, press the SET
button to reset that record to current value date and time.
5. Press the HISTORY button to exit MAX or MIN mode.
View and/or Reset Maximum Records with time and date stamp
1. Press the MIN/MAX button once to enter MAX mode.
2. Press the + button to view indoor humidity maximum value with time and date stamp.
3. With the value flashing, press the SET button to reset the record to current value date and
time.
4. Press the + button to view indoor temperature maximum value with time and date stamp.
5. With the value flashing, press the SET button to reset the record to current value date and
time.