Filter
Top Products
Model: 308-2316 www.lacrossetechnology.com/support Page | 9
12/24 Hour Time Format
7. 12H will flash and the letters HUR will show in the upper right corner.
8. Press + or MIN/MAX button to select either 12 hour (AM/PM) or 24 hour time
(24:00) format.
9. Press the SET button to confirm selection and move to time settings.
Time Settings
10.The hour will flash. Press + or MIN/MAX button to select the correct hour.
11.Press the SET button to confirm selection and move to the minutes.
12.The minutes will flash. Press + or MIN/MAX button to select the correct minute.
13.Press the SET button to confirm selection and move to calendar settings.
Calendar Settings
14.The year will flash. Press + or MIN/MAX button to select the correct year. Press the
SET button to confirm year selection and move to the month.
15.The month will flash. Press + or MIN/MAX button to select the correct month. Press
the SET button to confirm selection and move to the date.
16.The numeric date will flash. Press + or MIN/MAX button to select the correct date.
Press the SET button to confirm selection and move to the date format.
17.Press the SET button to confirm selection and select Fahrenheit or Celsius temperature units.
Temperature Units: Fahrenheit or Celsius
18.The indoor and outdoor temperature will flash together.
19.Press + or MIN/MAX button to choose Fahrenheit or Celsius temperature display.
20.Press the SET button to confirm selection and move to air pressure units.
Barometric Air Pressure Units: InHg or hPa
21.The pressure number and InHg (Inches of Mercury) will flash together.
22.Press + or MIN/MAX button if you wish to switch between InHg and hPa (Hecto
Pascal) for your pressure reading.
23.Press the SET button to confirm selection and move to relative air pressure number.
Relative Air Pressure Number
Set the relative pressure number to a local reporting station or Internet reading for
your location.
24.The relative pressure number will flash.
25.Press + or MIN/MAX button to adjust your relative pressure.
26.Press the SET button to confirm selection and move to relative air pressure sensitivity
setting.