Filter
Top Products
page 21
9.5 Adjusting Individual Jet Flow
adjusted or turned off by rotating the outside jet ring.
-
the center nozzle in these jets to the desired angle to cus-
tomize your personal massage. Note: Always keep at least 6 adjustable
jets open at all times to ensure proper ltration characteristics within spa.
9.6 Selecting Desired Massage Action
All models incorporate a massage selector valve that
allows you to customize the massage and performance
by diverting water between various jet systems within
or C for optimum performance. It is considered normal for sound levels
within the valve to increase between these positions due to the large
always leave this valve in position A when the spa is covered and select
9.7 Air Controls
control introduces air into the water lines that supply that
counterclockwise to open or clockwise to close. To mini-
mize heat loss, all air controls should be closed when the
spa is not in use.
10.0 Automatic Filtration Cycles
filtration cycle to remove debris from your spa. These cycles use the low
pennies a day!
Apart from their filtration benefit, each filtration mode also effects the
operation of the spa heater. Refer to sections 10.1 and 10.2 on the fol-
lowing page for details.
B
A
C
B
A
C