page 19
9.0 Operating Instructions
The spa control system has automatic functions that operate upon start-
1. Control panel displays current software
-
of all display segments and indicator lights
for proper operation.
3. After the initial start-up sequence ends,
the actual water temperature is displayed. If water temperature at
water temperature rises to the factory setting, then turn off. Note: it is
common for the heater to turn on after the spa is rst lled because
tap water is often very cold.
9.1 Setting Water Temperature
The spa’s thermostat provides optimum control of water
Note: The rst press of
either WARMER (+) or COOLER (-) button displays the set temperature.
9.2 Activate Jet Pumps
high speed, and the third press shuts jets pump 1 off. The
-
-
allly activated, either pump will automatically turn off after 20 minutes.
9.3 Standard Light Operation
The light button activates the foot well light in the spa
off. -
matically turn off after one hour.
1.
2.
3.
Spas with
Circulation
Pump Option
Spas without
Circulation
Pump Option
1.
2.
3.
Spas with
Circulation
Pump Option
Spas without
Circulation
Pump Option
1
2
1
2