Filter
Top Products
page 16
CAUTION: To prevent the unlikely possibility of contracting a
waterborne illness, maintain water chemistry within step 6
parameters. If you or other bathers experience such a condi-
tion, discontinue use and seek medical attention.
15.
hours. Retest water after 8 hours to determine if sanitizer levels are
stable. If sanitizer levels are stable, your spa is ready for use. To
ensure healthy water conditions, always maintain a constant sani-
tizer reading within the levels recommended by the Association of
manual. If sanitizer levels are not stable at this time, it will be neces-
sanitizer readings are achieved.
16. After adequate sanitizer levels are achieved, close all spa air con-
trols by rotating them clockwise to maximize heat retention when spa
is not in use.