Filter
Top Products
page 10
6.0 Electrical Wiring Instructions
IMPORTANT NOTICE: The electrical wiring of this spa must meet the
-
cable state or local codes. The electrical circuit must be installed by a
qualified electrician and approved by a local building/electrical inspec-
tion authority.
supply. No plug-in connections or extension cords are to be
used in conjunction with the operation of this spa.
power to the spa which is not in accordance with these instructions
will void both the independent testing agency listing and the manu-
facturer’s warranty.
2. The power supplied to this spa
must be a dedicated circuit with no
other appliances or lights sharing the power provided by the circuit.
3. To determine the current, voltage and wire size required, refer to
• All wiring must be copper to ensure proper connections.
Do not
use aluminum wire.
2
2
to the spa.
switch or circuit breaker to open all ungrounded supply conductors
-
spa water.
5. The electrical circuit supplied for the spa must include a suitable
6. To gain access to the spa’s power terminal block, remove the
screws securing the synthetic cabinet panel under the control panel