Filter
Top Products
766238 6/07 6-5
Tail Wheel Installation
NOTES:
1. Tire pressure 14-18 PSI.
2. Torque to 100 Ft. Lbs.
3. Wheel must rotate freely after wheel is assembled into fork and item 20,
nut, is tightened.
4. Ream tube to 1.250 (+.000/-.005) after welding. Then install item 8,
bushings, and ream bushing to 1.003 (+.005/-.005). Do not paint inside
bushings.
INDEX
NO.
SERVICE
PART NO.
MFG. PART
NO.
QTY. DESCRIPTION
1 052860 052860 2 CS .375-16 X 1.250 HX G5 ZN
2 017012 017012 2 LW .375 MEDIUM SPRING ZN
3 049346 049346 2 FW .375 X .870 X .078 ZN
4 385831 385831 1 PIVOT PIN
5 036244 036244 1 CS .375-16 X 1.00 HX G5 ZN
6 706168 706168 1 NT .375-16 HX JAM G5 ZN
523001 468934 1 TAIL WHEEL AXLE ASSEMBLY (INCLUDES ITEMS 7-17)
7 082180 N/A A/R MB 1.00 X 1.50 X .049 PN
8 018747 N/A 2 BRONZE BUSHING 1.250 X 1.00 X 1.250
9 508788 N/A 1 TAIL WHEEL AXLE
10 015511 N/A 1 GREASE ZERK 45°
11 016527 N/A 2 CS .50-13 X 1.00 HX G5 ZN
12 017046 N/A 2 LW .50 MEDIUM SPRING ZN
13 344267 N/A 2 FW .510 X 2.150 X .187 SPL ZN
14 077123 N/A 4 BEARING
15 387035 N/A 2 SPACER
16 082966 N/A 2 BUSHING
17 521989 N/A 2 FORK
18 041475 041475 2 CS .75-10 X 9.50 HX ZN
19 025296 025296 4 FW .760 X 1.620 X .080 ZN
20 061101 061101 2 NT .75-10 HX NY ZN
21 747782 747782 2 WHEEL & TIRE ASSEMBLY