Filter
Top Products
72
Technical Data
Hydraulic System
Max. working pressure 210 bar/3050 PSI
Power steering circuit max. working pressure 120 bar/1740 PSI
Transmission Hydrostatic
Manufacturer and type Pump Danfoss LPV25 25 cc variable annular piston
Front Sauer-Danfoss OEMV 160 cc
Rear Sauer-Danfoss OEMV 125 cc
Oil ISO VG 46 cSt
Oil volume, total including hydraulic system 13 litres
Maximum speed
Forwards, high speed 18 km/h
Forwards, low speed 13 km/h
Reverse, low speed 13 km/h
Max inclination, all directions 10°
Cutting unit Combi 155
Cutting width 1550 mm/61"
Cutting heights 25.4 - 127 mm / 1" - 5"
Blade length 560 mm/22"
Width 1610 mm / 5.28 ft
Weight 113 kg / 248 lb
Length machine with unit approximately 2800 mm / 9.19 ft
Bevel gear, oil volume 0.6 litres
Cutting unit Combi 132
Cutting width 1300 mm / 51.2"
Cutting heights 25.4 - 127 mm / 1" - 5"
Blade length 490 mm/19.3"
Width 1340 mm / 52.8"
Weight approximately 100 kg / 29.3lb
Length machine with unit approximately 2730 mm / 8.96 ft
Bevel gear, oil volume 0.6 litres
Data PT 26D