Filter
Top Products
13
Safety Instructions
• Reduce the risk of fire by removing grass, leaves
and other debr
is that may have fastened in the
machine. Allow the machine to cool before
putting it in storage.
• Do not turn over the engine by hand without
preventing the engine from starting, which can be
done in different ways:
a. Remove the glow plug, no compression the
engine can therefore be easily turned over.
b. Loosen a pressure pipe connection on each jet
pipe a 1/2 turn.
c. Secure the injection pump stop arm in position for
zero supply.
Transport
The machine is heavy and can cause serious
crushing injuries. Be extra cautious when it is loaded
on or unloaded from a vehicle or trailer.
• Use an approved trailer to transport the machine.
Activate the parking brake and secure the
machine using approved fasteners, such as
straps, chains or ropes when transporting.
• Check and comply with laws and regulations
when driving on public roads, a traffic kit is
available as an option. This can be retrofitted on
PT 26D.
Environment protection
Take care of the environment, there are numerous
environmental risks especially when performing
maintenance on the machine. This particularly
applies when dealing with engine oil, hydraulic oil,
fuel, oil filters, hydraulic filters and fuel filters. You
must be attentive to ensure spillage does not occur
when you open a system that contains oil or fuel.
• Always wipe up spillage. When using cloths,
sawdust or oil absorbents, these should be
treated as environmental hazardous waste.
Follow local regulations.
• Choose an area, preferably with a concrete floor,
when you handle or store oils and fuel so that
you can clear up any spillage without it
penetrating into the ground.
• Avoid spillage, use a funnel and fill carefully.
• When draining, ensure that a suitably sized
container is placed correctly. Remember that the
oil does not always run straight down.
• Transfer the waste oil into a sealed container and
IMPORTANT INFORMATION:
Clean the machine regularly
The parking brake is not sufficient to lock the
machine during transport. Ensure you secure the
machine firmly to the transporting vehicle.
Front securing eyelets