18
Presentation
4. Control panel
There are controls and switches on the control panel
on the right-hand side of the driver that are used when
operating the machine. The lower section of the panel
is equipped with a cover over the machine’s fuses and
relays. See “21-37. Controls on the control panel” on
page 20.
5-9. Seat
The seat has a hinged mounting on the front edge and
can be folded forwards.
To fold the seat forward, the steering wheel console
must be folded forwards and the lock (6) for the seat
operated.
The seat can also be adjusted lengthways:
• When making adjustments, the lever (8) under the
left-hand side of the seat is moved to the left, after
which the seat can be moved backwards or
forwards to the desired position.
• The seat’s suspension can be adjusted by turning
the knob (9) under the front edge of the seat. A
scale indicates the setting.
There are two knobs on the sides of the backrest:
• Backrest tilt is adjusted using the knob (5) on the
right-hand side of the seat.
• Lumbar support is adjusted using a knob (7) on the
left-hand side of the backrest.
WARNING:
Seat lock
6
Do not adjust the seat whilst driving. Risk of unsafe
operation.
Lateral adjustment and adjusting suspension
Adjusting the backrest tilt
Knob for the lumbar support