Filter
Top Products
60 – English
LUBRICATION
6. Throttle and choke wires, lever
bearings
Remove the right side panel from the lever housing
(1 screw) and open the engine hood. Lubricate the
exposed ends of the wires using an oil can,
including the ends at the engine. Move the levers
through their full range of travel and lubricate again.
Lubricate joints, locks and bearings for the cutting
deck control levers using an oil can.
Refit the side panel on the lever housing. Ensure
that the stubs fit in the cover on Pro 15.
7. Belt tensioner
Use a grease gun to lubricate the single nipple on
the right side below the lower engine pulley, until
grease is forced out.
Use good quality molybdenum sulphide grease.
Grease with a familiar brand name (petrol company,
etc.) is generally of good quality.
Pro 15
Pro 18