Filter
Top Products
4 – English
These symbols are on the machine and in the instructions.
Study them carefully so that you know what they mean.
Read the instructions.
Reverse Neutral Fast Slow Engine off Battery Choke Fuel
Oil level Cutting height Backwards Forwards Ignition
Use hearing protection Hydrostatic freewheel Parking brake Brake Warning
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Keep hands and feet away
from under the hood when
the engine is running
Switch off the engine and take off
the ignition cable before repairs or
maintenance
N
R
EXPLANATION OF SYMBOLS
Never carry passengers on the
machine or equipment
Never use the machine if persons,
especially children, or animals, are in
the vicinity
Drive very slowly
without the cutting unit
CE conformity
marking
Never drive across
a slope
Warning! Risk that the
machine can tip over
Warning! Rotating
blades
Starting instructions
Read the instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Hydrostatic pedals in neutral position
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
Noise emission to surroundings in accordance
with the directive of the European Community.
The machine’s emission is indicated in the
chapter TECHNICAL DATA and on the decal.