Filter
Top Products
20 – English
DRIVING
WARNING!
Never drive the machine on
ground at an angle of more than
15°. Mow slopes upwards and
downwards, never across. Avoid
sudden changes in direction.
MAX 15
WARNING!
Clear the lawn from stones and
other objects which can be
thrown out by the blades.
Cutting tips
• Localise and mark stones and other fixed
objects to avoid collision.
• Start with a high cutting height and reduce
down until the required mowing results are
obtained.
• The mowing results are best with a high engine
speed (fast rotating blades) and low driving
speed (slow moving machine). If the grass is
not too high and thick, the driving speed can be
increased without noticeably depreciating the
mowing result.
• The best lawns are achieved if the grass is cut
often. Mowing becomes more uniform and the
grass cuttings become more evenly distributed
over the surface.
The total time consumption is not greater since
it is possible to select a higher driving speed
without inferior mowing results.
• Avoid mowing a wet lawn. The mowing results
are inferior since the wheels sink down into the
soft lawn.
• Hose down the cutting unit with water
underneath each time it is used. Put the cutting
unit in the service position first.
• If you use the BioClip unit it is important to
mow the grass regularly.
• It is important to mow frequently when mowing
with the mulching function.
Release lever
The release control must be pulled out in order for
the Rider to be moved when the engine is shutoff.
The diagram shows the release lever in the out
position.
Mowing pattern