Filter
Top Products
English – 23
DRIVING PRO 15
Driving the machine
1. Release the parking brake by pressing the
brake pedal.
2
1
WARNING!
Make sure that branches do not
obstruct the pedals when mowing
under bushes, otherwise you may
lose control.
2. Carefully press down one of the pedals until the
required speed is obtained.
To drive forward press down pedal (1), or to
reverse pedal (2).
3. Push in the lock button on the lift lever and
lower down the cutting unit.
4. Select the required cutting height (1–9) with the
cutting height lever.
It is important that the air pressure in both front
wheels is equal, 60 kPa / 8.5 PSI, to produce
an even cutting height.
IMPORTANT INFORMATION
The life span of the drive belts is increased
significantly if the engine runs at a low
speed when the blades are engaged.
Therefore apply full throttle first when the
cutting unit has been moved to the mowing
position.