Filter
Top Products
42 – English
MAINTENANCE
Replacing the light bulbs, Pro 18
For information about the bulb type, see ”Technical
Data”.
1. Unscrew the two screws holding the cover on
the power servo housing. Lift up the cover and
turn it around the steering shaft.
2. Unscrew the two screws holding the lamp
insert.
Lift out the lamp insert.
3. Disconnect the cables from the bulbs.
4. Lift out the bulbs from the insert.
5. Insert the new bulbs. Make sure you use your
thumb to support the front.
6. Refit the cables, lamp insert and the cover on
the power servo housing.