Filter
Top Products
English – 15
PRESENTATION PRO 15
Lift lever for cutting unit
The lift lever is used to set the cutting unit in trans-
port or mowing position.
1. Pull back the lever to the locked position for
transport.
The cutting unit will lift up and the blades stop
rotating.
Lifting of the cutting unit
2. Press in the lock button and move the lever
forwards for the mowing position.
The unit will lower down and the blades start to
rotate.
3. The lever can also be used to temporarily
regulate the cutting height, e.g. for a small
mound in the lawn.
Lowering of the cutting unit
Lever for adjustment of the cutting
height
The cutting height can be adjusted to 9 different
positions with the cutting height lever.
Rear and side ejector unit 40-90 mm
(1 9/16" - 3 9/16")
BioClip and Combi unit 45-95 m
(1 3/4" - 3 3/4")