Filter
Top Products
8
SAFETY INSTRUCTIONS
• Husqvarna original spare parts are
designed and specified to maintain high
quality and correct fit for optimal durability
and lifespan. From a safety point of view,
you should only use Husqvarna original
spare parts.
• Check that all safety decals are in place.
See the chapter ”Symbols and decals”.
• Learn how to use the machine and its
controls safely and learn to recognize the
safety decals.
• Only use the machine for sowing and
dethatching lawns. It is not intended for
any other use.
• Check that the machine is in serviceable
condition prior to use; see the chapter
”Maintenance/Maintenance schedule”.
• Only use the machine in daylight or in
other well-lit conditions. Keep the machine
a safe distance from holes or other
irregularities in the ground. Pay attention
to other possible risks.
• Only allow the machine to be used by
adults who are familiar with its use.
• Never allow children or persons not trained
in the use of the machine to use or service
it. Local laws may regulate the age of the
user.
• People and animals can distract you
causing you to lose control of the machine.
For this reason, you should always
concentrate and focus on the task at hand.
• Never leave the machine unsupervised
with the engine running.
• Make sure that other people are nearby
when you are using the machine so that
you can call for help should an emergency
arise.
• The machine is tested and approved only
with the equipment originally provided or
recommended by the manufacturer.
Overexposure to vibration may lead to
circulatory or nerve damage, particularly
in people who have impaired circulation.
Contact your doctor if you experience
symptoms that could have been caused
by overexposure to vibration. Examples
of common symptoms include
numbness, pain, muscle weakness,
change of skin color or an
uncomfortable feeling of tingling. These
symptoms appear most frequently in the
fingers, hands or wrists.
WARNING!
The engine can become very hot. To
avoid being burned, you must turn off the
engine and wait until all parts have cooled
before touching the engine.
WARNING!