Filter
Top Products
34
LUBRICATION
Lubrication schedule
General
Stop the engine and remove the ignition cable before attempting to lubricate the machine.
Unless otherwise specified, when lubricating with grease use Husqvarna’s Universal Grease no.
5310038-01 or Husqvarna’s Lubrication Grease UL 21 no. 5310060-74.
Wipe away excessive grease after lubrication.
It is important to avoid getting lubricant on the belt or the drive surfaces on the belt pulleys. Should
this happen, attempt to clean them with spirits. If the belt continues to slip after cleaning, it must
be replaced.
DT22
8011-281