Filter
Top Products
40
ASSEMBLY INSTRUCTIONS
1. Handle
2. Oil refill engine
3. Clutch cable
4. Clutch bail
Assembly – delivery service
1. Rotate the handle and tighten it in place.
2. Fill the engine with the manufacturer-recommended oil. See section ”Lubrication/Engine oil”.
3. Test the clutch. Make sure that the clutch expansion spring disengages easily.
4. The engine RPM is preset by the manufacturer. Idle speed is 1250–1400 RPM. Maximum engine
speed is 3600 RPM.
See the engine manual for instructions on adjusting the regulator and carburetor if the engine speed
is not within these limits.
1
2
3
4
DT03